lifepo4 and maxxfan
Hello, I am new here. I didn't see a new member introduction so I will do that quickly before posting my question. Matt from Michigan. I have a 1989 pop top 8' skamper on a 2004 2500 duramax. So...
Forum Discussion
Yes progressive dynamics from Marshall mi. Getting older and my memory is slipping ??.The voltage at the fan connector was 14.2 if I remember correctly, I will recheck when I get home. I read online some said maxx air told them anything over 13.6 would fry the circuit board. I emailed maxx air today and am awaiting a response.
Just thought maybe it was the higher voltage since the fan worked with a regular lead battery when it was installed in a few weeks ago. I will connect it directly to that FLA battery to see it it works with that. I tried it with just the BB lifepo4 battery and then just the converter and neither worked. If no one runs a voltage regulator with the high volt output lifepo4 charger/converter and a maxxfan then it must be something else going on. Also, the lights all work fine, even the one on the circuit that feeds the fan.
Just thought maybe it was the higher voltage since the fan worked with a regular lead battery when it was installed in a few weeks ago. I will connect it directly to that FLA battery to see it it works with that. I tried it with just the BB lifepo4 battery and then just the converter and neither worked. If no one runs a voltage regulator with the high volt output lifepo4 charger/converter and a maxxfan then it must be something else going on. Also, the lights all work fine, even the one on the circuit that feeds the fan.
