I have been having a lot of trouble with my fridge. The pattern seems ambient temperature related. During the cool nights in the CO mountains off the grid, the unit would not run until about 10am. This past week it snowed about 10" and stayed near or below freezing for several days. It would not ignite these cold days. Now back in the warmth, I see the igniter wire is pretty crispy where it enters the ceramic piece of the igniter. Not sure the will solve the problem, but time to replace regardless.
Not sure this matters.. furnace worked fine, stove, hot water heater -- all good. End of the propane line is the fridge. There was also about 1/8" of frost below the propane level in the tank I was using at the time.
Two questions for the group:
1. Where can I find a service manual to ensure I get the right part(s) when needed?
2. Any thoughts on my sporadic fridge?
Thanks
Dave
