Making a strong seam in galvanized sheet?
I'm making a thingy, and I thought one of you guys might be able to advise :B. .It's for a small garden bed. I want to take some 6 or 8" galvanised flashing and make a ring. The seam needs to be s...
Forum Discussion
Without a doubt IMHO that is by far the strongest and most secure way to do it. Hot galvanizing leaves a rough surface. If your sheet metal galvanizing is smooth as a baby's patoosh, it has been electro-galvanized. In that case if buried, I would apply two coats of Rust-O-Leum RED primer then a finish coat of whatever color you choose.
Rust-O-Leum RED makes a joke out of other metal primers as far as adhesion and durability. if you want this thing to last until 2109 AD coat the Rust-O-Leum with black pickup bed coating available at Wal-Mart.
Rust-O-Leum RED makes a joke out of other metal primers as far as adhesion and durability. if you want this thing to last until 2109 AD coat the Rust-O-Leum with black pickup bed coating available at Wal-Mart.
