Marker light hole repair on aluminum, How?
When resealing the marker lights, I re-secured the lights in the same holes. Problem is, The screws just spin in the old holes. Tried to re-drill new ones. Didn't work. So, How can I secure them to th...
Forum Discussion
Tried JB weld. Kept curing like rubber. Local shop told me to try rivets but something tells me those wouldn't pull the lights in enough to compress the butyl tape. I mixed the jb 1:1 and it would not cure right and come right off the siding. Buddy told me to mix the ratio 2:1. Two parts hardener to one part steel. I was using the jb kwik. I need something to reattach everything to the body without replacing the entire side panels. Some are 29ft long.
