My AGM to Lithium conversion

jaycocreek wrote:

Is this merely a hypothetical exercise (pondering the outer batt limits?), or are you in someway concerned about exceeding it’s limits and activating the LVD??…Maybe I’m confused, but IF it’s the latter (though, as with FLA’s I don’t know why one might purposefully do so??), since you already have a competent shunt-based Victron, why not just do an actual load test? This would also inform you as to your actual a/hr capacity upon disconnect, and (assuming you have an inverter…) of potential low voltage alarms…Just saying…

3 tons

When I first posted on this thread it was all 80/20 or 90/10 talk compared too...I simply mentioned why not use 100% as most manufacturer batteries have a cycle count for..Some people may choose to use it all or very close to it without harm...If a user needs 102ah,it's there for use without worry whether he trips the LVD or not..If I didn't put it on paper right,oops..lol

Not really into nit picking word games...

Thanks for the added clarity and for stating your worthy objective - seems then a load test may be in order (though it’s not clear to me how a follow-up enquiry constitutes word games, but that’s just me…)

3 tons