My take on a "Strongarm" stabilizer
I built these stabilizers for my Wildwood. The adjusters are tractor top link adjustors that I had left over from a different project. The rest is scrap metal that I had laying around. I built a second one that handles the front back movement also. I think the adjusters cost me $15 or $17 apiece a year or so ago, the rest was "free".
They just slip over the 5/8" "pegs" and I can add some tension or compression by a couple of turns of the adjustors.
Removed for travel.
Pic 1
Pic 2
Pic 3
They just slip over the 5/8" "pegs" and I can add some tension or compression by a couple of turns of the adjustors.
Removed for travel.
Pic 1
Pic 2
Pic 3
