NEED ASSISTANCE... ATWOOD AFMD FURNACE
I have a 2018 class A gas unit with an Atwood afm series furnace. My problem is that it was sooting up and smelling, even to the point of sounding off the CO alarm. I thought I had a dirt dauber probl...
Forum Discussion
Did you verify with a meter that you have a good 12 V going to the board.
Also with the meter you can ohm out the switches to see if they are working properly.
Did you take a picture of the board or make a diagram of the board connections before you took it apart?
Also with the meter you can ohm out the switches to see if they are working properly.
Did you take a picture of the board or make a diagram of the board connections before you took it apart?
