Power Gear Slide Stuck in Out Position
Is anyone on here familiar with the power gear in frame 2.5” tube couch/dinette slide? Is there anything inside the outer slide tube that could be catching the inner tube? Slide won’t go in. Motor pow...
Forum Discussion
You said "I slid gears off"
Is this a rack in pinion system (long toothed gear, and a round gear)
if so push it in end by end. just an inch or two at a time till you have it in like six or 8 inches. then heave ho.... NOthing catches or should catch that I know of.
If it's some other (inner/outer tube, as opposed to channel) I can not help.
Is this a rack in pinion system (long toothed gear, and a round gear)
if so push it in end by end. just an inch or two at a time till you have it in like six or 8 inches. then heave ho.... NOthing catches or should catch that I know of.
If it's some other (inner/outer tube, as opposed to channel) I can not help.
