Pullrite Superglide 18K ISR Unhitching
I started having a problem unhitching my 5er off the hitch. Whenever I'm unhitching, I lower the front landing gear of the trailer and begin to elevate the kingpin off of the hitch. I do it until the ...
Forum Discussion
Me thinks you may be raising it too much. On mine, I lower the front landing gear until there is a slight gap, then I raise them (lowering the pin) just until the gap closes. I then pull the release handle. If it won't pull, I put the truck in neutral to take the pressure off of the pin. This usually happens when I have backed into a spot.
