Pump hammering after installing accumulator
I have a class B with a nearly new pump (Shurflo 4008, installed about 1 year ago). Even with the bypass, running the sink caused pump cycling to a degree though not as bad as it was with the old 3 ch...
Forum Discussion
I have a 4008 with a 1 gallon accumulator, installed it about 2 years ago. It worked fine with the factory settings. I believe I had the accumulator Air pressure set for around 25 psi. The only problem I have is when I get air in the system and that was a problem with the old shurflow.
Sam
Sam
