Question About WG Pro Sensor
Anyone know if the Pro Sensor uses DC current all the time ? It has no off/on switch like the older power supply panel does. The digital display times out, but I don't know how the power supply cou...
Forum Discussion
wa8yxm wrote:
Re-reading this. The Sensar PRO sends power to the antenna unless you select CABLE. if you select CABLE then the sensar pro is basically OFF or as OFF as it gets.
The SensarPro goes into SLEEP mode after 3 minutes of no activation but is still drawing a minimal amount of power regardless of any mode it may be in so that when any button is later pushed it instantly activates. If you want draw to be zero then installing a kill switch in the +12 vdc feed to the SensarPro is the answer.
