Forum Discussion

Learjet's avatar
Learjet
Explorer
Apr 09, 2015

Quick...and almost easy Progressive Industries EMS-HW50C

just installed the Progressive Industries EMS-HW50C behind my 50 amp panel...here is the "quick" and almost easy way to install one ;)

I know the display is side ways...but it is right above my stairs in my 5th wheel...I can also see it from outside with the door open.

I had enough slack to cut the shore wire and insert the EMS.

I did say quick and easy...;)

and because it didn't really happen with out pictures...








  • Dave5143's avatar
    Dave5143
    Explorer
    Apr 09, 2015
    Nice,
    Here's my installation of the 30A EMS.
    Since it is like Grand Central Station inside of the cabinet with wires & plumbing running every which way I made a mounting sled for my unit.

    The opening with the sled installed.

    The final install.


    Sorry, the links to my pictures won't load. Not sure if I screwed up or if the moderator needs to intervene.
  • Learjet's avatar
    Learjet
    Explorer
    Apr 09, 2015
    sdetweil wrote:
    Nice work! Does yours hum/buzz?

    I added one and an ATS in a kitchen cabinet with the distro panel and converter.


    Yes, that is normal for a large contactor like the one they use.
  • sdetweil's avatar
    sdetweil
    Explorer
    Apr 09, 2015
    Nice work! Does yours hum/buzz?

    I added one and an ATS in a kitchen cabinet with the distro panel and converter.

About Technical Issues

Having RV issues? Connect with others who have been in your shoes.24,190 PostsLatest Activity: Jan 23, 2025