repairing hole in solid siding rv
I have a hole in the side of my rv I need to repair, the siding is a hardboard (Coachman), not fiberglass, what is a good bonding product to repair with?
Forum Discussion
Be sure and drill a hole at each end of the crack to stop it from traveling any further. If it is just a visible type crack you may want to open it up a little bit with a cutter then use fiberglass body putty to fill the area. sand, wet sand, then paint. Unless it was a large void I would probably not resort to using fiberglass tape as it will show unless you grind the surface low enough that you can bring everything back flush with your repair.
