Replace Ladder stand off nut

Not sure which one of those you're concerned about. The Tiffin ladders are backed up by a molded in steel sheet behind the fiberglass, so removing those screws is fine as long as you don't "ham hand" them going back in. Don't power drive.

A line in your signature with your rig info (brand, model, year) helps responders tailor their comments to your rig.

pigman1 wrote:
Not sure which one of those you're concerned about. The Tiffin ladders are backed up by a molded in steel sheet behind the fiberglass, so removing those screws is fine as long as you don't "ham hand" them going back in. Don't power drive.

A line in your signature with your rig info (brand, model, year) helps responders tailor their comments to your rig.

its a 2000 chateau sport, but is that the procedure the entire ladder has to come off? there is 0 video's or docs on the replacement procedure

I have R&Rd my ladder, and IIRC, the only way to remove those nuts, is from the back, requiring removal of the standoff. Even then, it seemed they were locked in. I didn't need to replace any, and glad of that!

Jerry