wing_zealot wrote:
That plate on the frame is not a patch/repair. That is a splice plate, straight from the factory. I'll bet there is one just like it on the frame on the opposite side of the trailer.
When I saw the first plate, I slowly backed away figuratively speaking. But you're right, there are four plates just like the diagram shows on page 8 of the document you shared. Two behind and two in front of the axle section. It's clear this is an transparent factory practice.
It may not be the preferred frame choice by many who have voiced their opinion here, but it's clear this is a factory made situation.
Thanks, wing_zealot, for sharing your knowledge!
