Slide Out is Blowing Fuses
My daughter has a Rockwood Roo hybrid that blows a 30 amp fuse whenever the slide out is closed all the way. I thought I had the problem solved by thoroughly lubricating the slide, but the problem ha...
Forum Discussion
jyrostng wrote:BFL13 wrote:
The Lippert system "stop can" I mentioned earlier is described here--go down to page 14 for how to adjust for correct seal in or out.
https://www.lci1.com/assets/content/support/manuals/Electric-Through-Frame-Slide-Out-Manual.pdf
Lippert calls for a breaker, not a fuse
On my 2003 Lippert slide they want a 30a fuse on the pos wire near the battery post. Interesting to go to a CB.
I had the older style IN/OUT and when it failed I had to use the above link to figure out how to wire the new switch. Thank goodness guys here pointed me to that wiring diagram or I never would have figured it out! :)
I see in this link they also want the slide to be in for long term storage. Never have done that--it stays out when we are home. Oh well. :)
