Forum Discussion
BFL13
May 17, 2020Explorer II
As a side note, I would be scared of how the wires are on that tstat circuit board too easy to break something can't be fixed, so I would snip the wires half way up to leave length and wire nut them back together after.
That way no chance of breaking anything right at the circuit board and no chance of mixing up the colours, and--it is easy to put a meter on any two and for putting the ends together of the ones coming out of the wall for trying to see if anything makes the furnace work--and without shorting something on the circuit board can't be fixed.
That way no chance of breaking anything right at the circuit board and no chance of mixing up the colours, and--it is easy to put a meter on any two and for putting the ends together of the ones coming out of the wall for trying to see if anything makes the furnace work--and without shorting something on the circuit board can't be fixed.
About Technical Issues
Having RV issues? Connect with others who have been in your shoes.24,209 PostsLatest Activity: Feb 26, 2025