stuck slide
The slide on my brand new trailer is stuck in the out position. When I tried to pull it in, the back end moved, but the front end did not. After a few back and forth tries, neither end moves. My...
Forum Discussion
mbopp wrote:
You'll need to access the dead motor from the outside, loosen a set screw, and lift the motor up to be able to push the slide in if it's a Schwintec.
Yes, but Schwintec will manually push in or out once no power at the controller. It is easier, but you have to lift up BOTH motors. But if you lift the bad motor up, you can then go to override and the good motor will retract and you have to have someone pushing in the dead motor side. Doug
