Trimetric 2030 battery monitor
I'm in the process of installing my solar setup. I have everything installed except the solar panels. I am having issues with my Trimetric 2030 battery monitor. After charging to 95%, according to ...
Forum Discussion
I don't use the % SOC on my Trimetric, but I gather you must enter an estimated AH size of your battery bank so it has a baseline for "100%"
You need to get the batteries all the way full by SG using equalizing voltages or anything that works, and then re-set the AH count to zero to kick off the whole process.
Otherwise you are forever off on the AH count vs the un-loaded voltage wrt SOC observation. (like now)
Don't forget to disable the auto AH re-set (see manual) if you are on solar or you will get an un-wanted AH re-set every evening when it starts to get dark.
You need to get the batteries all the way full by SG using equalizing voltages or anything that works, and then re-set the AH count to zero to kick off the whole process.
Otherwise you are forever off on the AH count vs the un-loaded voltage wrt SOC observation. (like now)
Don't forget to disable the auto AH re-set (see manual) if you are on solar or you will get an un-wanted AH re-set every evening when it starts to get dark.
