Update on 50 ft 50 amp extension cord

Hi,

Did you check for extra voltage drop with the longer cords and extra connection? (Inquiring minds want to know).

SOmetimes that just 6 more feet really hurts you day haha...

Most places we go to when you back in the pedestal is right next to the trailer connector side...

I did pull into one in VA one time however where they shared a pedestal with two trailers. Can't image running the shore power cable across someone elses camp spot. There was just enough room to drive in instead of backing in so that is what I did but now my awning is on the wrong side. Glad it was just a one night stay...

Roy Ken

I will checked the voltage with my P.I. EMS. when I add the extension cord tomorrow and post the results.

Umm 25'+ 15' = 40', not 50'...

The extra length will probably only be an issue when very heavily loaded.

:)

If you know what wire size was used in the cable it is easy to calculate the worst case voltage drop.

Here is a handy voltage drop calculator.

ken white wrote:
Umm 25'+ 15' = 40', not 50'...

The extra length will probably only be an issue when very heavily loaded.

:)

I'm assuming he was previously thinking of buying a 2nd 25-foot and instead bought a 15'. Only the thread title says "50ft" to reference a previous thread. The "update" is that he only needs 40ft.

tenbear wrote:
If you know what wire size was used in the cable it is easy to calculate the worst case voltage drop.

Here is a handy voltage drop calculator.

Personally I would not use a 8awg wire for a 50amp load. So I consider this example a little iffy.