bearwayne wrote:
I looked at the wiring diagram of how I wired my thermostat and it is similar to what th Lux Tech told you EXCEPT I did not use the +7.5V and connected Rh/Rc to the GND (Green)wire from the control module. This correlates with what Chris Bryant said about having to take the relays to ground to activate. You might try that if what the Lux Tech said doesnt work.
In this thread is the diagram of how I connected my analog thermostat.
link
What kinda thermostat are you talking about? Chris was talking about the Atwood, Clarinet was talking about the Lux.
