Using the jack without the battery
I removed my battery to get my RV ready for winter. I go to use the jack and it won't work. It didn't matter whether it was hooked up to AC power or plugged into my truck, it would not work. Is that n...
Forum Discussion
BFL13 wrote:
With the battery not there, collect all the wire terminals that go on its positive post and join them with vise grips or a nut and bolt.
Now the converter will have a path to the jacks. This assumes the jacks are on a different wire that goes to the positive post. Assumes the jacks and the converter each has a negative path to the frame.
Do take care if you do this that the vice grips or nut and bolt don't short out to the chassis of the RV!
