What caulk for the Winegard antenna cable?
I'm repairing my Winegard Sensar antenna. The cable goes straight down through a fitting on the roof that is then covered with a boot. There was some kind of white caulk in there before. It was pre...
Forum Discussion
23hotrodr wrote:
I use RTV Silicone. Put some in around the coax and some in the boot to slip down on the coax and protruding riser. The RTV is more solid when cured and helps prevent the cable from pulling off the boot when antenna is rotated. Good luck.
That is what I use as well. A silicone caulk with adhesive qualities helps keep the boot in place.
