Wiring for inverter
I am going to install a new inverter I think about 800 to 1000 watts. We are low energy users. The wiring run from the battery will be approximately 12-14 feet. What gauge wiring should I use?T This...
Forum Discussion
jesseannie wrote:
I am going to install a new inverter I think about 800 to 1000 watts. We are low energy users.
The wiring run from the battery will be approximately 12-14 feet. What gauge wiring should I use?T
This will be mainly be used to charge batteries for various electronics.. cameras, computers, phones etc. I was thinking about a power strip so I could leave all these cords plugged in. Do you think that will be a problem as long as I don't overload?
Jesseannie
800 to 1000W is not a low energy load for a 12 Volt system...
12 to 14 ft... that's a long line for the load.. you are going to need 2/O awg cables at a minimum. a better option would be to move the inverter closer to the batteries, say < 2 feet and use 0 awg cables. cable resistance plays a BIG part with low voltage and high amperage.
