2019 Kodiak water in wheel well
I recently sold my NL TC and moved to a 2019 Kodiak Ultra Lite 201QB. Its in great shape but that never means "perfect" though what is. I've taken it on 1 weekend trip and with heavy rain found t...
Forum Discussion
I decided the best option was to start by removing the spray foam. I needed to figure out if it was open or closed cell anyway (it's closed cell). So now I have a blank canvas except for the residue. Can I install eternabond tape over the spray foam residue or will that compromise the seal?
Second, I'm assuming I'm going to have to pull the skirt back to get that area sealed. I don't like the idea of ignoring it but it looks like a royal pain to get it off. I can remove the screws, but I'm guessing the metal is sealed on with silicon. To reinstall, I'd assume I'll have to clean the silicon first. Just seems like opening a can of worms!
If there's an easier way and I'm over complicating this, I'd appreciate experienced comments!
Second, I'm assuming I'm going to have to pull the skirt back to get that area sealed. I don't like the idea of ignoring it but it looks like a royal pain to get it off. I can remove the screws, but I'm guessing the metal is sealed on with silicon. To reinstall, I'd assume I'll have to clean the silicon first. Just seems like opening a can of worms!
If there's an easier way and I'm over complicating this, I'd appreciate experienced comments!
