A wiring Question for the older Atwood Electric Jacks
So, I'm in the process of wiring things up on Ms. Merry the Amerigo, and one of the things I did during the install was I moved the electric jack system from the KIT to Ms. Merry.
I've run into a slight snag, though, because its been so many years since I originally did the jacks on the KIT and I didn't bother to take photos of the original wiring I'd done before I tore it apart, I can't remember on the driver's side plug if the wire pair with stripes on it is the main power in connection or the pair without the stripes.
These are the atwood electrics where the controls are on the driver's side jacks, so the front jack for example would have front drivers side and front passenger side controlled from the same jack, same on the rear.
I've run into a slight snag, though, because its been so many years since I originally did the jacks on the KIT and I didn't bother to take photos of the original wiring I'd done before I tore it apart, I can't remember on the driver's side plug if the wire pair with stripes on it is the main power in connection or the pair without the stripes.
These are the atwood electrics where the controls are on the driver's side jacks, so the front jack for example would have front drivers side and front passenger side controlled from the same jack, same on the rear.
