Advice for inverter installation
I'm adding a 600 watt inverter and the plan is to put it in the pass thru storage compartment, which will be just behind the batteries on the trailer tongue. My first inclination was to run the cable...
Forum Discussion
Mounted the switch on my panel.
Made a wood bracket and mounted my 600 watt samlex Psw underneath our bed storage compartment wall. Ran most my wires through and exsiting hole but had to drill another hole next to it, blasted it with caulking and its held up. Mine is 10 feet from batts. The owners manual said at 10ft use 1/0 cable so i did and put a circuit breaker 6inches off batt.
