Awning cover
Came up with a different way of protecting my awning and keep the tree debris out of the valley between the trailer and the awning while is rooled up. I looked at the Pro-tech product that is adver...
Forum Discussion
The cost was just under $50.00. I pop rivetted the drip edge to the duct tube. I butted the edge of the drip edge to the side of the trailer just under the lip of the roof. The weight of the ducting which isn't much, hold it in place. The tubes sleeve together to make a continuous covering for the awning. The only downfall, is the I can't keep it on for travel. I used 4" diameter, I could have gone with the 3" but did not want to take a change with ripping the fabric.
