Travel Trailer Group
cancel
Showing results for 
Search instead for 
Did you mean: 

Conversations

Towing Livin Lite 21 RBS with sway control

Does anyone out there have any knowledge about towing the Livin Lite with a sway control hitch. I have a Equalize brand sway control hitch that you do not have to drill into the aluminum frame when mounting. Talked to the factory and they told me tha...

6.0 PS Good/Bad Years

I'm shopping around for a newer diesel vehicle, really want a full size crew cab and of course I need a 8' box. I keep coming back to Fords, Ive seen some real nice 2003-08 models that fall within my price range. I know that the early model 6.0 Power...

HJGyswyt by Explorer
  • 5359 Views
  • 30 replies
  • 0 likes

Warranty Question

I know this has been asked a million times, but I will take the advise from this forum and purchase, or not purchase this warranty. We turned down the dealer warranty; $2500 for 5 yrs. We priced the RV wholesale warranty and its $1500 for 7 years. ...

jbjuices by Explorer
  • 1295 Views
  • 6 replies
  • 0 likes

RV Plug Wiring Pattern

I was looking up the wiring pattern for a standard 7 pin RV plug and I got contradictory information. Which is correct?or...

LeBout by Explorer
  • 2306 Views
  • 4 replies
  • 0 likes

She's Beautiful!!

We picked up our new trailer over the weekend from Camping World. It's a 2014 Rockwood Signature 2311SS Diamond Ed. The dealer was fine to work with although I had to switch from a salesmen to a sales manager to help us because we weren't being tak...

jbjuices by Explorer
  • 3571 Views
  • 15 replies
  • 0 likes

Has anyone successfully cleaned the foam beds?

I took the covers off and they are in the wash. Yuck they were so gross! My parents 5 greyhounds slept on the one side and they smelled very doggy and were filthy. The foam still smells. Has anyone successfully washed them in a mild bleach or deterge...

front tire pressure

Gonna haul my 9000lb 5th wheel with my 2500HD tires do 80 psi on truck, have the rear tires 80 psi what should i run the front?Never run the front full. What does everybody do?

Lance 825 pre wired for AC?

I have a 2010 Lance 825. It has a fantastic fan, but no AC. I did notice it has a breaker marked for AC. Does anyone know if one of the vents may already be wired for AC? Also, the other two vents don't currently have fans which pretty much defeat...

shiltsy1 by Explorer
  • 2200 Views
  • 5 replies
  • 0 likes

dometic 310 toilet

Does anyone know a part number for a toilet flange. I have purchased a dometic 310 toilet off the internet and cant find a toilet flange at any of the big box stores. Thankyou

Gray water plumbing problem

After our last camping outing I noticed a sewer smell in the main area if my camper. U started checking the plumbing to see if there were any breaks. I noticed where the kitchen sink drain goes into the holding tank the connection is not glued togeth...

todde278 by Explorer
  • 1276 Views
  • 8 replies
  • 0 likes

Equalizer maintenance (Not the hitch!)

The axle equalizer on my trailer does not have grease-able fittings. It from Circa 1994 and I am starting to think it may be worth the effort to replace them. Has anyone done this before? How likely is this part to fail? Is this a driveway job or ...

dont they check these things?

Howdy. Neighbors bought a brand spanking new Jayco.I guess they didn't check it thoroughly enough at the dealer (Camping World) or at home before they took it out to the hot Utah east country. Once there found out air conditioner did not work. Compre...

nephi007 by Explorer
  • 2488 Views
  • 9 replies
  • 0 likes

which truck is best

I am buying a toy hauler which weighs 14,189 and my ford F-250 has a max fifth wheel capacity of 15,900. Is that enough wiggle room or do I need a different truck ,which truck would be better dodge,chevy , or stay with ford I dont want a dually if I ...

solrac65 by Explorer
  • 6437 Views
  • 37 replies
  • 0 likes

Proflex Rv Flexible Sealant ?

I just got some Proflex Rv Flexible Sealant , I have never used it before, could anyone that has used it before tell me how much time I have to work with it before it dry’s, is it hard to work with?Thanks