Ok, unfortunately since I have Sleep Apnea, I have to carry my CPAP machine around everywhere I go. I could not bring it camping, but the wife doesn't like it when I snore or when I stop breathing for an extended period of time. :EWith that said, she doesn't want to give up her side of the bed that has the power outlet next to the head of the bed that I would use to power the CPAP.So, I need to figure out the best way to run an extension cord or power strip from the wall at the foot of the bed to the head of the bed. I am looking for something that is low profile and won't cause a tripping hazard. I will post pictures for perspective in a bit. Any practical advice or experience would be appreciated.dhClick For Full-Size Image.

Do you have 12 volt dc available there? Most CPAP machines are actually 12 volt dc powered, if yours has a "brick" in the power cord yours is as well. 12 volt dc cords are available for many brands.

Your pics don't show up, probably because you're trying to load directly from your computer or a website that doesn't allow linking. Instead, upload your pic(s) here, copy the url created, and paste that into your post.

Not sure why this is so difficult. Why can't you just plug an extension cord into the outlet at her side of the bed and run it under the mattress to your side of the bed?

kerrlakeRoo wrote:Do you have 12 volt dc available there? Most CPAP machines are actually 12 volt dc powered, if yours has a "brick" in the power cord yours is as well. 12 volt dc cords are available for many brands.I had not considered that. I figured I would use the 110v cord. But it is good to know there are options.

SoundGuy wrote:Your pics don't show up, probably because you're trying to load directly from your computer or a website that doesn't allow linking. Instead, upload your pic(s) here, copy the url created, and paste that into your post.Well, after my fifth try at uploading the pics, it will have to wait until I get home. The mobile application I am using on my phone is not cooperating. I will upload them tonight on my PC when I get home.

Best way to get outlet/power strip next to bed???

kerrlakeRoo
Explorer
Mar 20, 2018
Do you have 12 volt dc available there?
Most CPAP machines are actually 12 volt dc powered, if yours has a "brick" in the power cord yours is as well. 12 volt dc cords are available for many brands.
SoundGuy
Explorer
Mar 20, 2018
Your pics don't show up, probably because you're trying to load directly from your computer or a website that doesn't allow linking. Instead, upload your pic(s) here, copy the url created, and paste that into your post.
DownTheAvenue
Explorer
Mar 20, 2018
Not sure why this is so difficult. Why can't you just plug an extension cord into the outlet at her side of the bed and run it under the mattress to your side of the bed?
darleyhavidson
Explorer
Mar 20, 2018
kerrlakeRoo wrote:
Do you have 12 volt dc available there?
Most CPAP machines are actually 12 volt dc powered, if yours has a "brick" in the power cord yours is as well. 12 volt dc cords are available for many brands.

I had not considered that. I figured I would use the 110v cord. But it is good to know there are options.
darleyhavidson
Explorer
Mar 20, 2018
SoundGuy wrote:
Your pics don't show up, probably because you're trying to load directly from your computer or a website that doesn't allow linking. Instead, upload your pic(s) here, copy the url created, and paste that into your post.

Well, after my fifth try at uploading the pics, it will have to wait until I get home. The mobile application I am using on my phone is not cooperating. I will upload them tonight on my PC when I get home.
sch911
Explorer
Mar 20, 2018
DownTheAvenue wrote:
Not sure why this is so difficult. Why can't you just plug an extension cord into the outlet at her side of the bed and run it under the mattress to your side of the bed?

X 2
darleyhavidson
Explorer
Mar 20, 2018
DownTheAvenue wrote:
Not sure why this is so difficult. Why can't you just plug an extension cord into the outlet at her side of the bed and run it under the mattress to your side of the bed?

The bed is located in the slide out. The slide out covers the outlet on her side when closed. So to prevent any accidents/damage. I am not running a cord under the mattress and plugging it into the outlet. I am not going to risk someone closing the slide with the cord in the way.

Thanks for your feedback.
Sam_Spade
Explorer
Mar 20, 2018
kerrlakeRoo wrote:
if yours has a "brick" in the power cord yours is as well.

NOT necessarily true.
Most of those "bricks" are NOT 12 V.
Lynnmor
Explorer
Mar 20, 2018
Is there some reason why you can't install an outlet on your side of the bed, and do it right?
RoyB
Explorer II
Mar 20, 2018
Here is a neat thread from JAYCO that might get your interest

https://www.jaycoowners.com/forums/f8/12v-outlet-inside-1207-a-15106.html

AMAZON has several 12V power panels you can install that has the round DC modules in them. You can mount these vertical or horizontal just about anywhere you need one...

Google search

Since the lighted up one are really bright at night getting a panel with ON-OFF switch would be best idea... If you are going to mount one of these in a cabinet you would want to get the USB CHARGE PORT modules to plug in all of your tablets, cellphones etc...

I went abit over board on my setup in my OFF-ROAD POPUP to support my Ham Radio operations when camping off grid...

Roy's image

Roy Ken