Carport

I was going to add photos. Has it changed how you attach photos?
Thanks, Jeff Drennan

Just had our Carolina Carports garage completed today. Also increased gauge of steel for added strength. Footprint 16’ x 25’. Garage door 12’ wide x 13’ tall. Just waiting for new truck camper to arrive.

Jeff Drennan

I called an outfit in North carolina and they install a metal carport 24 x 12 12' high for 1100 bucks.

billtex wrote:
Anybody use one?
Thinking of the inexpensive steel/corrugated roof structures found all over the inter web.

If so, where do you live?
Wind/snow?
What size did you get?
Other thoughts?

Our ADCO was shredded last winter after 6 years or so of use...I am getting tired of replacing those.

Thx, Bill

I too would love to have a carport,but I just cannot afford one at this time..I keep looking for something cheap that I can rebuild but finding one high enough for the TC,keeps getting more expensive..

I also put a cover on my TC when not using it but it is a pain for one person to do...It would be so nice just to back into a carport of some sort and be done with it without being caught in heavy snow and not being able to put the cover back on, like what happened here..

I'm a little late to this thread but a few years ago I finally put my camper under roof. United Carports, 22' wide, 36' deep and 12' sidewalls. This still gives me plenty of room to load the camper under roof. To get the same clearance with a pole building I would have had to go with 14' side walls.

GeoBoy wrote:

BradW wrote:

GeoBoy wrote:
I have a VersaTube structure, rated at 90 mph wind load and 65 lb. snow load. It’s 30’ long by 12’ wide by 12’ high side wall, with 13.5’ in the peak.

GeoBoy,

The height on mine will be very close. When you say the high side wall height is 12'-0", is that 12' from the concrete to the roof sheet metal or is that 12' to the bottom of the roof structural rectangular tube the roof sheet metal roof sets on?

Basically, is there a full 12' clearance at the edges of the cover when you back your TC under it? Or is it 12' minus 2" or 3" for the roof support tube?

thanks for your help,
bradw

Brad, I will measure it tomorrow morning.

Ok, sorry I didn’t get back yesterday. My VersaTube measures 12’ tall at the inside sidewall, it is 13’8” clear in the peak. Inside width is 11’6”.

We bought an RV that sat outside for two years because it would not fit in my 10ft tall shop. Last year I built a new building and made sure it was tall enough for anything I wanted to park in it. 14ft doors. I like many know the frustration of having a roof that is just a little too short.

BradW wrote:

GeoBoy wrote:
I have a VersaTube structure, rated at 90 mph wind load and 65 lb. snow load. It’s 30’ long by 12’ wide by 12’ high side wall, with 13.5’ in the peak.

GeoBoy,

The height on mine will be very close. When you say the high side wall height is 12'-0", is that 12' from the concrete to the roof sheet metal or is that 12' to the bottom of the roof structural rectangular tube the roof sheet metal roof sets on?

Basically, is there a full 12' clearance at the edges of the cover when you back your TC under it? Or is it 12' minus 2" or 3" for the roof support tube?

thanks for your help,
bradw

Brad, I will measure it tomorrow morning.

Should have built bigger as the 5W's got larger.

GeoBoy wrote:
I have a VersaTube structure, rated at 90 mph wind load and 65 lb. snow load. It’s 30’ long by 12’ wide by 12’ high side wall, with 13.5’ in the peak.

GeoBoy,

The height on mine will be very close. When you say the high side wall height is 12'-0", is that 12' from the concrete to the roof sheet metal or is that 12' to the bottom of the roof structural rectangular tube the roof sheet metal roof sets on?

Basically, is there a full 12' clearance at the edges of the cover when you back your TC under it? Or is it 12' minus 2" or 3" for the roof support tube?

thanks for your help,
bradw