Cool Mods - Thread restored 10/18/2012
My daughter was getting a little warm in her bunk during our last camping trip, so I decided to put her a fan in to keep the air flowing. I had been wanting to add a 12-volt fan to the main livin...
Forum Discussion
Did the old LED under side lights on my TT this weekend with a little different twist so I thought I'd share. Picked up two rolls of cheap LED's on Amazon Link and a 12v remote control with dimmer Link. I wired the setup into my 12v supply for stabilizer jack under rear bunk. After reading about how many people have issues with the 3M adhesive backing letting go I decided to mount with cable ties. Down the right side I was able to cable tie to the metal LP line, on the left side I used two cable ties, one around the bolt for the underbelly skin and one attached to the first one. Yea, it's not pretty but no one is going to see it. The picture below is from before I trimmed cable ties and tightened bolt back up.
