Do You Use Centering Blocks/Devices?
My new truck (2015 RAM 3500 SRW) is a bit wider (the outside of the bed) than the old truck. When I placed the camper in the bed last weekend I was concerned that the space between the wheel wells an...
Forum Discussion
My camper bumpstops allow the camper too far forward, contacting the top of the bed.
I just stand a 3" spacer, ( 2 -2xs nailed together) against the front of the bed.
If you wanted to close the gap on the sides, make 3/4 of a picture frame out of the front spacer and a couple 1xs or 3/4 plywood.
Fwiw I've not noticed my camper shifting side to side at all in many miles of bad roads.
Then again, it's heavy enough that it's made its own indentations in the truck bed! Prolly helps keep it locked in!
I just stand a 3" spacer, ( 2 -2xs nailed together) against the front of the bed.
If you wanted to close the gap on the sides, make 3/4 of a picture frame out of the front spacer and a couple 1xs or 3/4 plywood.
Fwiw I've not noticed my camper shifting side to side at all in many miles of bad roads.
Then again, it's heavy enough that it's made its own indentations in the truck bed! Prolly helps keep it locked in!
