Do You Use Centering Blocks/Devices?
My new truck (2015 RAM 3500 SRW) is a bit wider (the outside of the bed) than the old truck. When I placed the camper in the bed last weekend I was concerned that the space between the wheel wells an...
Forum Discussion
You may want to add some support under the tail of the camper on each side where it widens out beyond 4 feet. My current camper has a thick plywood screwed under it, installed by a previous owner. The sides are sagging where the plywood doesn't support them, since a 4x8 sheet was used. It doesn't look like the previous owner supported underneath the sides.
On my previous camper, which I also spaced up with a 3/4" plywood sheet, I also used 2 small pieces of plywood under the rear sides to keep the surface even and didn't have any sagging problem with the sides of that camper.
On my previous camper, which I also spaced up with a 3/4" plywood sheet, I also used 2 small pieces of plywood under the rear sides to keep the surface even and didn't have any sagging problem with the sides of that camper.
