scootsk wrote:
Cummins12V98 wrote:
Not a valid charge.
OP be sure to get your front aligned to 1/64" toe. This stops the outer edge "Stepping".
ONLY rotate the fronts side to side keeping rotation the same. YES than means dismounting the tires from wheels. Puts both outside edges on the inside.
I have 44k on my DRW tires and all 6 measure 5/32" tread depth. Rears never get touched.
Run 80 psi fronts all the time and 30 psi unloaded rear and inflate to what the chart dictates per your rear tires weight plus 5psi.
What prompted this rear tire change at 40k was one tire was bald. The rest were seven years old but had good tread left.
I am curious what your response has to do with I said?