Electric Tongue Jack advice

Suggest spending a few minutes looking on Ebay. Lots of folks, including us, have bought from them, saved a bunch of $$ and have a great jack. Seems like the one we had on our HTT was a refurb Ultra 3500 and we never had any issues....except the time DH ran it past the stopping point and blew the fuse. The one we got for our TT was brand new....maybe another Ultra, but can't remember. For the HTT cost was right at $100 and that was in '07. The one we got this spring was about $130. I would not be at all concerned about a refurb...they're factory refurb and as good as or better than a new one since all the oops are gone.

I also have the Barker 3500 VIP 24". The extra stroke helps with hitching and unhitching the trailer.

I have the barker 3500 VIP 24". It's nice.

I have this from eTrailer-- http://www.etrailer.com/Trailer-Jack/Husky/HT87247.html Great power, and built to last.

I had a Bull Dog, it was a nice jack. I now have a Barker VIP 3500, it's a very well made jack, it's made in the USA.

I have the barker. The big reason for going with this brand was at the time, it was the only that offered the extended lift. Really comes in handy. If not for this, any of the larger named brands would be fine.

You mentioned your trailers tongue weight. You probably already know this but because no one mentioned it, the real weight of concern is the total weight the unit has to lift when raising the trailer AND truck so the spring bars can be attached. We've not had a problem with our Atwood unit but the combined weight exceeded our Class VI/V hitch to the point where it eventually bent up. We've replaced the hitch with a beefer unit BUT this lesson brought home to us the significant total weight this jack needs to contend with.

2 cents worth

Great advice, thank you all! Haven't made up my mind in brand yet but it's certainly going to be my first mod. Thanks again, and thing Spring!

I purchased a 3500" electric tongue jack from Camping World last year that I regret. The tube that extends out from the main tube and the "foot" had the structural integrity of an beer can. The metal was to thin and would not support the weight of the trailer. JH

I have a Husky Brute HB3000 and it's worked fine for a couple of years now.