Ford shift on the fly - no 4HI
2010 F-360 6,4L My electronic shift on the fly will not engage in 4 HI. It will go into 4 low, comes back out into 2HI just fine, just no 4HI. I can manually lock the hubs and it will work, just not...
Forum Discussion
austinjenna wrote:so the steering does bind up in 4LO?
Its easy to determine if it goes into 4 low. I put in N, flip to 4low, put in D and you can immediately tell because the engine revs up when giving some gas and I am going like 2 MPH.
I can tell its not going into 4Hi using the switch because I can flip the switch drive and turn the wheels and I get no binding at all.
If I manually lock the hubs drive and turn the wheel it will start to bind up so i know its in 4wd
Has it always done this?
Are you sure locking the hubs is not required?
