Forest River Vibe stabilizing issues
I have a Forest River Vibe 308BHS with electric stabilizing jacks. I deploy the jacks until both feet touch down plus a couple more seconds so that it puts a little pressure on the frame. However, t...
Forum Discussion
This is exactly the thread I was hoping to find. My Sunset Trail Reserve 32BH has a lot of shake in it. I already have the SteadyFast system installed on it and BAL X-Chocks, but that didn't help. My theory was the shake left in it was due to the stabilizer design allowing a shift from side to side. It seems others have and the same experience and thoughts.
I recently lost the back stabilizer motor again (first was replaced under warranty). With this latest failure I am thinking I will replace the entire stabilizer with BAL scissor jacks. Attach the SteadyFast system to that to see if that helps. I know mine is not a Forest River so this is slightly off topic, but the stabilizers look identical and the problem sounds the same. Has anyone else replaced their fancy electronic stabilizer with the scissor jacks? If so do you have any regrets?
Thanks
I recently lost the back stabilizer motor again (first was replaced under warranty). With this latest failure I am thinking I will replace the entire stabilizer with BAL scissor jacks. Attach the SteadyFast system to that to see if that helps. I know mine is not a Forest River so this is slightly off topic, but the stabilizers look identical and the problem sounds the same. Has anyone else replaced their fancy electronic stabilizer with the scissor jacks? If so do you have any regrets?
Thanks
