Forum Discussion
mosseater
Jul 24, 2014Explorer II
Just another one of the many wonders of common sense and ineffective construction that gets by as the "standard of the industy".
The tanks should fill on the TOP, not the upper side. And the vents should be attached at the TOP, from BOTH ends. The vent lines should NOT have any dip in them as they exit the trailer. And the pump intake and drain should be on the BOTTOM, not the side. This is pretty basic stuff and they get it wrong consistantly by the thousands every day. Sure would be nice to be able to use ALL the water capacity they advertise for a change.
The tanks should fill on the TOP, not the upper side. And the vents should be attached at the TOP, from BOTH ends. The vent lines should NOT have any dip in them as they exit the trailer. And the pump intake and drain should be on the BOTTOM, not the side. This is pretty basic stuff and they get it wrong consistantly by the thousands every day. Sure would be nice to be able to use ALL the water capacity they advertise for a change.
About Travel Trailer Group
44,030 PostsLatest Activity: Jan 21, 2025