Genrac Inpact 36 lp - Sleepy Help
I have looked at prior threads - in particular Sleepy's comments back in 2009. Hopefully I'll catch him in a good mood... 1. Generator ran fine last weekend - but battery was weak so I replaced it...
Forum Discussion
AnEv942
Just came in from looking at a couple things to see your message.
1. I in fact did jump across the contactor contacts and the starter turned vigorously... would seem to indicate starter is OK.
2. I did find the service manual on line and it mentioned a 15A fuse on the contactor lug. I didn't see one.... did I miss it? I would love to replace a "contactor fuse" and have that work.
3. All the connections appeared sound and none of the insulation was missing from any of the wires....
4. In my mind I think this is the contactor or it's fuse if one exists, or I fried the A6060 board. You would think it would have overload protection though and the fact that the 7.5A fuse blew makes me think the board was likely isolated before any damage was done.
Maybe I'll order a contactor and replace that - seems an inexpensive step prior to trying find a service center.
Just came in from looking at a couple things to see your message.
1. I in fact did jump across the contactor contacts and the starter turned vigorously... would seem to indicate starter is OK.
2. I did find the service manual on line and it mentioned a 15A fuse on the contactor lug. I didn't see one.... did I miss it? I would love to replace a "contactor fuse" and have that work.
3. All the connections appeared sound and none of the insulation was missing from any of the wires....
4. In my mind I think this is the contactor or it's fuse if one exists, or I fried the A6060 board. You would think it would have overload protection though and the fact that the 7.5A fuse blew makes me think the board was likely isolated before any damage was done.
Maybe I'll order a contactor and replace that - seems an inexpensive step prior to trying find a service center.
