Golf Carts

You can also use a simple "come along" if you dont want to invest in an electric winch. Using one of the two is really the only way to go. If you are attaching the ramps correctly (per the manufacturer specs) and are in the correct weight limit, there is no reason for any failure (even when wet) Riding any vehicle onto a pickup "could "result in falling no matter what your set up

But, the hospital stay when you try and drive the golf cart into the back of the pickup and it falls could get expensive too. I still like the winch idea. I don't bounce as well when I fall as I used to when I was a teen. If your to the age of needing a golf cart to get around your old enough to need a less painful way of loading the thing up.

Walking around instead of driving the golf cart would be better for you health. I mean no offense by saying this.

Caveman Charlie wrote:
Back when we used to load our ATV in the back of the pickup with ramps we had a set of rams that were a tri-fold. They were like 3 ramps put together and then they folded up to the size of one ramp. This way they were more stable then 2 separate ramps. (Sorry if I didn't explain this very well. If you don't understand ask and I'll see if I can find a picture somewhere)

I use this style for my atv but they are way to short to safely load a golf cart. They are normally only 60-70" long. I guess they may make longer ones but I get they cost quite a bit.

Back when we used to load our ATV in the back of the pickup with ramps we had a set of rams that were a tri-fold. They were like 3 ramps put together and then they folded up to the size of one ramp. This way they were more stable then 2 separate ramps. (Sorry if I didn't explain this very well. If you don't understand ask and I'll see if I can find a picture somewhere)

The pictures were mine of the ramp set up. I had the cart fall with my ramps tied down. Things were a little damp and I HAD to load up and pull out. Ha ha ha.

Got half way up and the back tires started to slip. Next thing I knew the cart was sideways and the ramps were on the ground.

Ramps can be safe if it's dry... What if you have to load up in the rain and your 500 plus miles from home? If you have a winch in the bed of the truck then there is no problem.

Securing the part of the ramps that touch the tail gate or bumper with eye bolts is good. But the ramps can still kick out or in if the back of the ramps are not secure.

What I considered doing is modifying the ramps with two lengths of all thread or something like that so that I can fix the width of the ramps exactly to the wheelbase of my cart.

Another thing to think about, at least on my club car ds is that the front tire track were more narrow than the rear. So if I set the ramps even with the middle of the front tires the back tires would hang off a bit.

Thanks and please be safe.

Jeremiah

Ramps aside some great ideas here. If you have not purchased your golf cart yet many campgrounds do not allow gas golf carts. Many campgrounds only allow electric / battery type.

Unyali, I have always placed my straps like that and had no issues from 400lb atvs right up to a HEAVY old school Case garden tractor. I tie off to the same place the safety chains hook to on the hitch. If the suspension on the truck compresses, the strap gets tighter if anything. Backing up to an incline is a big help loading. The other thing is ramp design. Arched ramps are better, and there is no substitution for length. I have one set of ramps that doesn't connect securely where they rest on the tailgate. These only have 2 little "hooks" for the tailgate and are more likely to slip sideways. I bought another set where the "hook" runs the width of the ramp and is deeper. These ramps are rock solid when loading.

cinrock wrote:
but the Ford has an aftermarket Chinese POS tailgate that folded up like a cheap suit the first time I tried.

Curious. I loaded my 900 pound 05 ultra with 250 pounds of me on board on my 05 F150 tail gate over and over again with out issue. Next was my 1000 pound 11 road glide ultra and my 12 F250 tailgate then my 1000 pound RZR. Not a problem loading with ramps on tailgate ratchet strapped to bumper brackets.

-Jeff

cinrock wrote:
but the Ford has an aftermarket Chinese POS tailgate that folded up like a cheap suit the first time I tried.

Curious. I loaded my 900 pound 05 ultra with 250 pounds of me on board on my 05 F150 tail gate over and over again with out issue. Next was my 1000 pound 11 road glide ultra and my 12 F250 tailgate then my 1000 pound RZR. Not a problem loading with ramps on tailgate.

-Jeff

Been doing it for years. We use folding aluminum arched ramps rated for 1500lbs. Used to secure the ramps directly to the tailgate on my GMC but the Ford has an aftermarket Chinese POS tailgate that folded up like a cheap suit the first time I tried. Now I remove the tail gate, strap the ramps to the bumper and get on with it. It always helps to use a curb or some other higher ground to your advantage. Beware of wet grass or dirt, definitely a safety hazard.