Help needed on 3 way fridge

Cleaned burner. Problem solved. Thanks to all those who helped.

Flame is orange and not blue as shown in your photo.

Thanks

Kent

The 'gas ON/OFF safety valve' knob has 4 positions
OFF
Low
Medium
High

You turn it to High when lighting. After main flame is lit you can leave it on High if ambient air temps are above 80*F (or if you have open door issues-----door being opened a lot).
If contents get too cold you can lower temps by using the other positions (Low/Medium) which will regulate the size of flame accordingly.
Main flame stays lit until you turn gas off or a failure occurs.

> Hunterfamily - You can post an image if you use the Advanced Post Form link at the bottom of the page. The "upload image" icon is 5th from the right... looks like a mountain scene against a yellow sky.

Here is what one looks like generally ...

About an inch. Is there some way I can post a photo?

A fridge doesn't have a pilot....If it is self lighting, you have a spark unit....Do you have to light the burner when you go to gas?.....The flame you see is the burner.
It needs to be high enough to heat the system. How high is it?

Thanks
I guess it may be the burner. Does the burner burn like that? I am not familiar with these fridges, but have a gas stove and the pilot and burner are not in the same place.

Are you sure is the pilot and not the burner. The burner is about 3/4 inches long and 1/4 wide. Pilot should be about 1/4 round.
Manual