Jack Failure Disaster
I had a terrible experience yesterday when I tried to unload my camper which resulted in my camper falling over on its side in my front yard. It happened so fast I'm not exactly sure where it went wro...
Forum Discussion
The piece I want to mount the jack to with the three pinch rings was originally a piece of steel I-beam we had left over at work. I cut off part of the "I" and turned it into a "T". I hope to bolt it onto the wing brackets for loading and unloading with 4 each 3/4" bolts and it wouldn't be attached to the camper at all. I can't image it will flex much into the camper or side to side as it is a very stout chunk of metal. My old tripod bolted to the same bracket also, but this adapts the corner jack to the wing style lift bracket. I started making the three new wing brackets today and hope to have them done next week. The old one in the picture has seen better days and I have plenty of steel to pull out of the scrap bin to work with. I had read exoskeleton article and was impressed but I hope to try something less aggressive. Thanks for the feedback.
