FYI, I just got off the phone with Cust. Support @ Lance. After checking with the engineering dept. they confirmed that the battery boxes are being sent to the dealers with the holes drilled into the tops, and the stiff 2AWG house wiring installed. The dealers are left to sort out how to get the wires connected to the batteries. In theory the grommets are supposed to be sealing the holes. The holes in my boxes are not even round, they must have broken the plastic while drilling. I plan to replace the wires with proper 2AWG flex wire and route it thru the sides as designed. Some spare plastic & JB weld will seal the holes on the box tops.
