No rear overload spring on my new 2012 Ford F250?

mbloof wrote:

billtex wrote:


Just sayin’.

Read much?

The OP has a F250. I have a F250. I offered to the OP how I carry a much heavier camper on my F250.

Off topic much? Since you don't seem to have anything to offer, why are you posting on this thread?

Just sayin.




- Mark0.

What I have to offer is it makes no sense to buy a 3/4 ton and spend thousands of dollars on upgrades when you can buy a one ton for ~ $400 more and have the OE capability.
If GVWR is a concern, those upgrades gain you zero.

Somebody piss in your fruit loops this morning?

mbloof wrote:

billtex wrote:


Just sayin’.

Read much?

The OP has a F250. I have a F250. I offered to the OP how I carry a much heavier camper on my F250.

Off topic much? Since you don't seem to have anything to offer, why are you posting on this thread?

Just sayin.


- Mark0.

The trolls are gonna troll, just ignore them.

Americamper wrote:
Would it be cheaper to get the factory overload and sway bar or go after market?

Been a few years since I ordered my new 250, but at that time the camper pkg, when ordered was $160. My dealer said if oem camper pkg was installed later, in his shop, would be around $1,200.

In your case, after purchase, likely cheaper to go aftermarket, and may be better product.

Jerry

billtex wrote:


Just sayin’.

Read much?

The OP has a F250. I have a F250. I offered to the OP how I carry a much heavier camper on my F250.

Off topic much? Since you don't seem to have anything to offer, why are you posting on this thread?

Just sayin.


- Mark0.

mbloof wrote:

billtex wrote:

mbloof wrote:

Americamper wrote:
I have not loaded the camper yet as I am waiting on torqlift frame mounts which should be here this week.

I carry ~4000lbs (camper+gear) on a 2017 F250. (SC, 4x4, 6.7L, Lariat)

While the loaded weight was within the stock tires maximum load ratings (3450x2), the sway driving it nearly made me sea sick.

Since I had installed Toyo M608z's 265/70 19.5" tires and Vision Heavy hauler 81 rims on the 1997 F250 the new 2017 was replacing, it was a no brainer to put them on the 2017 F250 Ford. This fixed the sway.

The rear end sag while loaded ready for camping made my head lights aim higher than on coming traffic liked so I had airbags installed. A mere 20PSI in ether side allows the headlights point where they should.

YMMV


- Mark0.

Or just buy the one ton.

Actually, the one ton (if one were available at the time of purchase) would not of bought me much of anything. (if anything at all)

While the OEM tires on F350's are rated at 3650 so MAY not have had as much sway from tire flex. (then again, I still likely would of swapped the tires/rims out for the 19.5's that I already owned)

I likely would still have installed airbags to level it out AND

.... drum roll please...

since last time I was on the scales @ ~12000LBS would of been over the one ton's GVWR.

so in the end, I replaced a 1997 F250 with a 2017 F250 and very happy with the purchase and results.


- Mark0.

GVWR meaningless for carrying a TC. You never stated what your loaded rear axle weight is but a one ton could have negated the need for; air bags and 19.5” tires/wheels.

Upgrade from 3/4 ton to one ton is ~ $400.

Upgrade to those items you mentioned-which doesn’t change your GVWR at all-is thousands of $$$.
And if you really are concerned about GVWR, a SRW gasser can get you 12,400 lbs.

Just sayin’.

billtex wrote:

mbloof wrote:

Americamper wrote:
I have not loaded the camper yet as I am waiting on torqlift frame mounts which should be here this week.

I carry ~4000lbs (camper+gear) on a 2017 F250. (SC, 4x4, 6.7L, Lariat)

While the loaded weight was within the stock tires maximum load ratings (3450x2), the sway driving it nearly made me sea sick.

Since I had installed Toyo M608z's 265/70 19.5" tires and Vision Heavy hauler 81 rims on the 1997 F250 the new 2017 was replacing, it was a no brainer to put them on the 2017 F250 Ford. This fixed the sway.

The rear end sag while loaded ready for camping made my head lights aim higher than on coming traffic liked so I had airbags installed. A mere 20PSI in ether side allows the headlights point where they should.

YMMV


- Mark0.

Or just buy the one ton.

Actually, the one ton (if one were available at the time of purchase) would not of bought me much of anything. (if anything at all)

While the OEM tires on F350's are rated at 3650 so MAY not have had as much sway from tire flex. (then again, I still likely would of swapped the tires/rims out for the 19.5's that I already owned)

I likely would still have installed airbags to level it out AND

.... drum roll please...

since last time I was on the scales @ ~12000LBS would of been over the one ton's GVWR.

so in the end, I replaced a 1997 F250 with a 2017 F250 and very happy with the purchase and results.


- Mark0.

mbloof wrote:

Americamper wrote:
I have not loaded the camper yet as I am waiting on torqlift frame mounts which should be here this week.

I carry ~4000lbs (camper+gear) on a 2017 F250. (SC, 4x4, 6.7L, Lariat)

While the loaded weight was within the stock tires maximum load ratings (3450x2), the sway driving it nearly made me sea sick.

Since I had installed Toyo M608z's 265/70 19.5" tires and Vision Heavy hauler 81 rims on the 1997 F250 the new 2017 was replacing, it was a no brainer to put them on the 2017 F250 Ford. This fixed the sway.

The rear end sag while loaded ready for camping made my head lights aim higher than on coming traffic liked so I had airbags installed. A mere 20PSI in ether side allows the headlights point where they should.

YMMV


- Mark0.

Or just buy the one ton.

mellow wrote:
You can still load it in the bed to get a test fit and check how much drop you get and how your shocks load.

What do the shocks have to do with carrying a load?

Americamper wrote:
I have not loaded the camper yet as I am waiting on torqlift frame mounts which should be here this week.

I carry ~4000lbs (camper+gear) on a 2017 F250. (SC, 4x4, 6.7L, Lariat)

While the loaded weight was within the stock tires maximum load ratings (3450x2), the sway driving it nearly made me sea sick.

Since I had installed Toyo M608z's 265/70 19.5" tires and Vision Heavy hauler 81 rims on the 1997 F250 the new 2017 was replacing, it was a no brainer to put them on the 2017 F250 Ford. This fixed the sway.

The rear end sag while loaded ready for camping made my head lights aim higher than on coming traffic liked so I had airbags installed. A mere 20PSI in ether side allows the headlights point where they should.

YMMV


- Mark0.

You can still load it in the bed to get a test fit and check how much drop you get and how your shocks load.