Old water heater drain
Hello all, this is my first post and I have a question about a water heater. I have 78 Fleetwood Prowler. It has been stripped down to the frame and Im building a teardrop trailer on it. My question i...
Forum Discussion
I put a new washer in it. I think its leaking where it swivels on the stem part of it.
I apologize for the pic size, just wanted to give good images so people could see what I'm talking about. I can take them down if necessary. Can you elaborate when you say you cant scroll to see other posts? I can scroll to the right and see mine and everyone else's post text. Are you using a phone? Im on my desktop. I dont know if I can make them smaller now. Ive closed the windows to the image host site and dont think I can get back to it. Would have to take them down and reupload them.
What was the point of adding this connector in here and removing the 1/2" plug. It was a pain to try and hold the metal part from spinning while trying to screw in the plastic plug. Having the original plug would seem to have been much easier.
One more thing, does anyone know what kind of tank is in this water heater, aluminum or steel? Just want to know if i should try to get an anode for it. And also was wondering, on the steel tanks, if they are glass lined why do they corrode and need an anode rod?
Sorry, a lot of questions and info in one post. Tried to make paragraphs to separate it.
Thanks everyone
I apologize for the pic size, just wanted to give good images so people could see what I'm talking about. I can take them down if necessary. Can you elaborate when you say you cant scroll to see other posts? I can scroll to the right and see mine and everyone else's post text. Are you using a phone? Im on my desktop. I dont know if I can make them smaller now. Ive closed the windows to the image host site and dont think I can get back to it. Would have to take them down and reupload them.
What was the point of adding this connector in here and removing the 1/2" plug. It was a pain to try and hold the metal part from spinning while trying to screw in the plastic plug. Having the original plug would seem to have been much easier.
One more thing, does anyone know what kind of tank is in this water heater, aluminum or steel? Just want to know if i should try to get an anode for it. And also was wondering, on the steel tanks, if they are glass lined why do they corrode and need an anode rod?
Sorry, a lot of questions and info in one post. Tried to make paragraphs to separate it.
Thanks everyone
