peculiar brake situation with Prodigy P3
The short version: My Prodigy P3 is displaying "OVERLOAD - NO BRAKES", but the trailer brakes are still activating. What's the most likely cause, and should I worry? The long version: I hooked up ...
Forum Discussion
Ok, thanks, I guess the P3's reading of 5.6A tells me it is in range overall, right?
Both magnets are actuating (it's a single axle). I checked with a compass, for what that's worth.
If 2.3 ohms is excessive, that seems to indicate that the shop messed something up. But since the brakes work, does it matter? Maybe I should just ignore the warning message.
However, if 2.3 ohms is an acceptable readout, then I'd be inclined to think maybe the controller is bad.
Both magnets are actuating (it's a single axle). I checked with a compass, for what that's worth.
If 2.3 ohms is excessive, that seems to indicate that the shop messed something up. But since the brakes work, does it matter? Maybe I should just ignore the warning message.
However, if 2.3 ohms is an acceptable readout, then I'd be inclined to think maybe the controller is bad.
