peculiar brake situation with Prodigy P3
The short version: My Prodigy P3 is displaying "OVERLOAD - NO BRAKES", but the trailer brakes are still activating. What's the most likely cause, and should I worry? The long version: I hooked up ...
Forum Discussion
The problem is definitely in the trailer. You're controller didn't just decide to fail between the time you dropped off and picked up the trailer. Hopefully though the problem didn't now damage your Prodigy.
What I would do, but then I always do things a bit differently than most. Disconnect one wheel at a time and carefully do a test pull to see if the problem goes away. If the problem does go away then take it back and tell them which wheel seems to be causing a problem.
What I would do, but then I always do things a bit differently than most. Disconnect one wheel at a time and carefully do a test pull to see if the problem goes away. If the problem does go away then take it back and tell them which wheel seems to be causing a problem.
