cancel
Showing results forย 
Search instead forย 
Did you mean:ย 

Powerstroke 6.7L Wastegate Solenoid Noise

CabinetmakerII
Explorer
Explorer
After 103K miles my 2011 F-450 Dually developed a strange noise approximately 30 seconds after the motor is shut down. A loud buzzing noise starts that cad be heard from 20' away. It lasts approximately 45 seconds then fades away. It was intermittent at first but now it does it every time I drive the truck.

I have researched the Ford Forum as well as You Tube and find a lot of guys with the problem but no answers from Ford. In fact Ford says its normal... Was not normal during the first 103K miles.

Any intel would be appreciated.
Cabinetmaker

2021 DRV 39 DBRS3
2017 F-450 4X4, Riece 24K Hitch
2011 F-450 4X4, Companion 18K Hitch, Air Bags (Retired)
2012 Cyclone 3800, 5th Airborne Kingpin (Retired)
2018 Polairs 1000 XP Side by Side
3 REPLIES 3

CabinetmakerII
Explorer
Explorer
Krusty wrote:
There is a service bulletin related to that noise. Article 13-10-7. Updated vacuum harness part# BC3Z-9D430-E


By all indications by the trouble shooting in the TSB, this should be the solution. I ordered that part number and included the VIN. I was contacted by the company and advised that was the wrong part for my truck. I authorized the switch (which was less expensive) but when I went to replace the part I discovered quickly they did not send the correct one. The one they sent only has 2 connections. The part pictured has several and looks like a spiders web.

That said, I makes no since to me that "if disconnecting the hose stops the noise, then it is the waste gate solenoid" and they fix the problem with a replacement hose vice a new solenoid. No wonder I was a cabinetmaker and not a mechanic...

Thanks for the input!
Cabinetmaker

2021 DRV 39 DBRS3
2017 F-450 4X4, Riece 24K Hitch
2011 F-450 4X4, Companion 18K Hitch, Air Bags (Retired)
2012 Cyclone 3800, 5th Airborne Kingpin (Retired)
2018 Polairs 1000 XP Side by Side

Lynnmor
Explorer
Explorer
After engine shutdown, apply the brake. I had the TSB mentioned above done and the problem is fixed.

Krusty
Nomad II
Nomad II
There is a service bulletin related to that noise. Article 13-10-7. Updated vacuum harness part# BC3Z-9D430-E
Krusty
92 F-250 4x4 460 5spd 4.10LS Prodigy
97 Rustler RT190
EU2000i
Garmin