Spread Axle Bolt Broke - Help!
The bolt in the middle seems to have broken. The washer/nut have disappeared. The whole assembly appears to be angled now. I'd like to try to remove the bolt and replace on my own. Can I just remo...
Forum Discussion
Once you get the tension off of it you will probably have to drive it out with a proper size drift pin. Hopefully, the splines are still holding the bolt from turning. I'll bet that they are. If not, I used to tack them in place. It is an easy fix either way. The splines are there so that the equalizer turns on the bolt and the bolt doesn't turn inside the mount.
